Polar Blaster creates lashings of thick, clingy foam with Polar Blast, optimises the density required to efficiently deep clean with Polar Wash and produces the perfect consistency to apply the hyper-hydrophobic Polar Seal in seconds. The adjustable spray pattern allows you to easily follow your car's contours, ensuring total coverage and appropriate dwell time on mud, traffic film and other contaminants. Complete a full exterior car care routine in a way that is quick, fun, and safe for your car's surfaces, reducing the risk of swirl marks and scratches. How to use 1.      Dilute the product at the recommended rate, outlined on the sidewall of the Polar reservoir bottle. 2.      Screw the Foam Gun Head onto the Polar reservoir bottle and attach the Polar Blaster to your pressure washer lance. 3.      Aiming at the floor, pull the trigger on your pressure washer, allowing the Polar product to feed through. 4.      Turn the Dial to adjust the foam level and turn the Nozzle to change the spray pattern. 5.      Once the Polar product has fed through at the desired level, begin applying to your car in accordance with the relevant Polar Series product instructions. 6.      Rinse the reservoir bottle with clean water after using it with each product. 7.      Flush through the Polar Blaster with clean water when you have finished using it to apply all intended products.