Nitromors Craftsman Paint, Varnish & Lacquer Remover delivers expert-level results with a smooth, fluid formulation crafted for delicate surfaces. This thin yet potent solution is engineered to strip layers from intricate doors, furniture mouldings, and ornamental metalwork with ease. Its dichloromethane-free formula offers effective performance while enhancing user safety. Trusted for precision restoration since the early versions endorsed by master craftsmen, it balances gentle application with powerful results making it an essential tool for refined restoration, DIY, and professional users alike. Directions For Use: 1. Prepare the workspace: Work in a well-ventilated area, preferably outdoors. Protect surrounding surfaces with suitable coverings. Wear appropriate gloves and eye protection.2. Apply sparingly: Shake the tin, then pour a small amount into the cap to control application. Using a brush or sponge, apply a thin layer (approx. 1-2 mm) to the painted or varnished area.3. Wait for blistering: Allow the product to sit until the finish begins to lift, this typically takes a few minutes.4. Remove softened coating: Carefully scrape away the loosened paint or varnish with a scraper or nylon tool. For fine detail areas, a nylon brush may help.5. Clean the surface: Rinse thoroughly with water or wipe with white spirit on sensitive wood surfaces to avoid raising the grain. Sand lightly and allow to dry before refinishing.6. Safety first: Dispose of waste responsibly and avoid skin contact and inhalation. Check the container for full health and safety instructions.