Ronseal Interior Varnish Quick Dry Matt Clear 750ml Ronseal Interior Varnish gives great protection against knocks, scuffs and scratches. Suitable for use on interior wood such as skirting and wood tables to keep the beauty of the wood. Diamond Hard protection Recoat in 1 hour Resistant to knocks and scuffs Gives wood a natural finish Low odour Coverage - 16 m²/litre Number of coats - 3 Dry time to touch - 20 minutes Dry time to recoat - 1 hour Application - Brush Sheen - Matt Waterproof - Yes Base - Water based To prepare: Ensure the room is warm and ventilated. To prepare the wood for varnishing, give the surface a wipe down with a cloth and white spirit to remove wax, grease, dirt and oil. Use 120 grit sandpaper to give the surface a quick sand and smooth out any rough patches. If the wood has an old coating on it, sand away the peeling, loose and flaking bits so the surface is even. Let the dust settle and wipe it away with a damp cloth. Leave the wood to dry thoroughly before varnishing. Application: Give your varnish a stir, and test the colour on a hidden patch to make sure you're happy with it. It may darken your wood slightly but it should bring out its natural colour. If you're happy with how it looks, apply an even layer of the varnish painting in the direction of the woodgrain. Wait one hours for the coat to dry. You will need two to three coats for complete coverage and protection. Before you apply your final coat (whether that's the second or third), sand down the surface and wipe the dust off with a cloth. This will help your final coat stick smoothly and will give you a perfect finish. When you're done: Clean brushes in warm, soapy water. If you do spot a section of your varnish that's looking less than perfect, sand it until smooth and then just reapply a couple of coats. Depth: 100 MM Quick drying, touch dry in 20 minutes. Recoat after 2 hours. Protects all interior wood with a beautiful fade resistant finish. Height: 100 MM Width: 120 MM